Biofilter Systems - bioteg GmbH Biofilter Systems - bioteg GmbH
Biofilter Systems - bioteg GmbH German pages
Biofilter Systems - bioteg GmbH -> HomeBiofilter Systems - bioteg GmbH Biofilter Systems - bioteg GmbH -> ContactBiofilter Systems - bioteg GmbH Biofilter Systems - bioteg GmbH -> SolutionsBiofilter Systems - bioteg GmbH Biofilter Systems - bioteg GmbH -> InformationBiofilter Systems - bioteg GmbH Biofilter Systems - bioteg GmbH -> DistributionBiofilter Systems - bioteg GmbH Biofilter Systems - bioteg GmbH -> References Biofilter Systems - bioteg GmbH

REBF-Series: Vent Pipe Biofilter

1. Filter container (HDPE)
2. Filter material
3. Suspension ring with gasket
4. Detachable cover (a=HDPE, b=stainless steel)

Application:

The Vent Pipe Biofilters have been specially designed to reduce odors from various vent pipes, as for example, from pump stations. They should be used for small airflow rates where space does not allow the use of a Stand-Alone Biofilter.
The Vent Pipe Biofilters come in a standard range of sizes, fitting various ventilation pipes, and are simply inserted into the ventpipe.
Depending on the evnvironmental conditions, the biofilter material may last up to 7 years. The replacement of the filter material is an easy and inexpensive process. The used biofilter material can then be readily composted.

Features:

  • High efficiency
  • Compact design
  • Easy installation
  • Very low investment costs
  • Trouble free operation
  • Practically no maintenance
Technical Data and Measurements


TYPE
Weight*
[lbs]
Waste Air Stream
[cfm]
D1
[mm]
D2
[mm]
H1
[mm]
REBF-100 8 1.8 95 135 1000
REBF-125 10 2.0 105 150 1000
REBF-150 22 2.4 145 195 1000
REBF-200 33 2.9 190 250 1000
REBF-250 53 4.1 240 290 1000
REBF-300 77 6.5 290 350 1000
* Weight humidified and ready tu use
Special sizes upon request

H2 = 150mm for all REBF biofilters
 
Home - Contact - Solutions - Information - Distribution - Gallery


© 2012 bioteg GmbH email: service@bioteg.com